form
... ...
Other SteelSelect sites:
twitter facebook
SteelSelect
 
Product Listing
go back
LYSAGHT SPANDEK® - LYSAGHT (Quick Find reference no. 20) LYSAGHT®
Overview
LYSAGHT SPANDEK® is a contemporary looking, trapezoidal profile which is ideal where a stronger, bolder, more modern corrugated appearance is required. It combines strength with lightness, rigidity and economy.
  • Can be used for both roofing and walling applications
  • Available in a wide variety of COLORBOND® steel colours
  • Allows wide support spacings
Note:
  • May be used on roof pitches from as low as 3 degrees (1 in 20)
Min Roof Pitch
3 degrees
Sheet Coverage
700mm
Availability
This product is listed in the following states:
SA, NSW, VIC, TAS, QLD, WA, NT, ACT
This is a guide only, please contact the manufaturer direct to confirm availability
* denotes "By Enquiry"
Associated products: LYSAGHT CUSTOM BLUE ORB® | LYSAGHT CUSTOM ORB® | LYSAGHT FLATDEK® | LYSAGHT INTEGRITY® 820 | LYSAGHT TRIMDEK® | LYSAGHT CUSTOM ORB ACCENT® 21 | LYSAGHT CUSTOM ORB ACCENT® 35 | LYSAGHT CUSTOM ORB ACCENT®
SpecWriter: Create a specification for LYSAGHT SPANDEK®
Material Choices:

IMPORTANT: This is a guide only, for material availabilty please contact the rollformer direct or visit www.lysaght.com

Material Gauges
COLORBOND® steel 0.42 BMT, 0.48 BMT
ZINCALUME® steel 0.42 BMT, 0.48 BMT
COLORBOND® Ultra steel 0.42 BMT, 0.48 BMT
COLORBOND® Stainless steel 0.42 BMT
COLORBOND® Metallic steel 0.48 BMT
COLORBOND® Coolmax® steel 0.42 BMT, 0.48 BMT
Material Selection Guidelines
"Reference table for selecting a material grade in a marine environment - This table is intended to serve as a GUIDE ONLY. It is essential to consult with BlueScope Steel Direct for advise on the most suitable choice of COORBOND® steel and ZINCALUME® steel product.
NATSPEC BlueScope Steel branded worksheets
NATSPEC BlueScope Steel branded worksheets - includes: 0341 GALVASPAN purlins & girts in structural steel.doc, 0423 COLORBOND and ZINCALUME roofing.doc & 0436 COLORBOND and ZINCALUME cladding.doc

Why specify ‘Base Metal Thickness (BMT) over ‘Total Coated Thickness’ (TCT)
The base thickness of some building materials can be described as BMT – base metal thickness. Product thickness has been, in isolated instances, nominated as ‘TCT’ total coated thickness.
This can be misleading and should not be used in specifications. For more information;
Download technical Bulletin TB14 – Builders Guide to Australian steel sheet and strip standards

Tools / Content
Dimensions
Calculate product weight
Create a Specification
Product Brochures
CAD Profiles
Textures / Flat Swatches

Warranty

LYSAGHT® Product Performance Warranty brochure

warranty application

Feature Projects

Kennels are best of breed - BlueScope LYSAGHT® media release

McWilliam family "plants" steel again - BlueScope LYSAGHT® Media Release



Brochures - View more LYSAGHT brochures Top of Page
File Type Thumbnail Name/Description File Size Download

PDF File
LYSAGHT SPANDEK® brochure
LYSAGHT SPANDEK® is a contemporary looking, trapezoidal profile which is ideal where a stronger, bolder, more modern corrugated appearance is required. It combines strength with lightness, rigidity and economy.
Dated added/updated: 10/02/11
298.16  KB  

PDF File
Roofing & Walling Installation Manual 2012-2013
A guide to the installation of steel roofing and walling manufactured by BlueScope LYSAGHT®.
Dated added/updated: 13/05/13
5,150.77  KB  

PDF File
Walling Solutions
There's a LYSAGHT® walling solution to suit every Australian building. This brochure includes product information for: Custom Orb®, Easyclad®, Panelrib®, Mini Orb®, Multiclad®, Spandek®, Trimdek®, Trimwall®, Wallclad®
Dated added/updated: 03/08/10
886.42  KB  

PDF File
LYSAGHT® Roofing Product Performance Using Foam Packers
This one page download outlines the use of foam packers with LYSAGHT® roofing profiles
Dated added/updated: 01/10/10
174.45  KB  

PDF File
LYSAGHT® Roof & Wall Flashing - Architectural Detailing Manual
Architectural Detailing Manual.
Dated added/updated: 08/05/14
3,367.13  KB  

PDF File
LYSAGHT® Cyclonic Area Design Manual Steel Roofing & Walling & TOPSPAN®
This 32 page Cyclonic Area Design Manual Using Topspan Profiles and LYSAGHT® roofing and walling claddings - has been prepared to assist architects, engineers and builders in the correct specification and installation of LYSAGHT TOPSPAN® profiles and roofing & walling claddings in cyclonic areas. It is a supplement to the LYSAGHT® Roofing & Walling Installation Manual and individual product brochures, and should be used in conjunction with those publications.
Dated added/updated: 04/08/14
2,911.10  KB  
 
IMPORTANT LYSAGHT STATEMENT FOR PDF BROCHURE DOWNLOADS

Following BlueScope’s launch of next generation ZINCALUME® steel, Lysaght has commenced supplying our unpainted product range using next generation ZINCALUME® steel AM125 where previously original ZINCALUME® steel AZ150 would have been used . Next generation ZINCALUME® steel AM125 is guaranteed by BlueScope to meet AS1397 and the ‘deemed to satisfy’ requirements of the Building Code of Australia for applications such as roofing and walling.

We are currently updating the Lysaght website and brochures to reflect this change. In the meantime, where the enclosed literature makes reference to ZINCALUME® the reader should note that this may refer to the previous version of the product.

Due to its increased corrosion performance compared to original ZINCALUME® steel AZ150, roofing applications made from next generation ZINCALUME® steel AM125 will be backed by an improved warranty of up to 36 years.*

* For full terms and conditions and to determine the eligibility of your project for the warranty visit www.bluescopesteel.com.au/warranties or call BlueScope Steel on 1800 022 999

For further information on next generation ZINCALUME® steel visit http://www.nextgenzincalume.com.au/



CAD Profiles - View more LYSAGHT cad files Top of Page
File Type Thumbnail Name/Description File Size Download
 

DWG
SPANDEK® CAD file
Use the SPANDEK® profile directly in your CAD designs.
Dated added/updated: 19/11/09
27.21  KB  

DGN
SPANDEK® CAD file
Use the SPANDEK® profile directly in your CAD designs.
Dated added/updated: 19/11/09
23.50  KB  

DXF
SPANDEK® CAD file
Use the SPANDEK® profile directly in your CAD designs.
Dated added/updated: 19/11/09
29.53  KB  

ArchiCAD
Spandek® CAD file
Use the Spandek® profile directly in your CAD designs.
Dated added/updated: 19/11/09
20.47  KB  

VectorWorks
Spandek® CAD file
Use the Spandek® profile directly in your CAD designs.
Dated added/updated: 19/11/09
46.21  KB  

Revit
Spandek® CAD file
Use the Spandek® profile directly in your CAD designs.
Dated added/updated: 19/11/09
156.00  KB  

Revit
COLORBOND® steel Texture Library for Revit 2013/2014 - LYSAGHT Content (LATEST COLOUR PALLETTE)
Package includes the latest COLORBOND® steel colours; Cove™, Mangrove™, Gully™, Wallaby™, Terrain™, and Basalt™. Includes flat colour swatches, all profiles now include a ZINCALUME® steel texture. Installation instructions are included with this download.
Dated added/updated: 23/10/13
26,391.08  KB  

Revit
Revit 2014 Roofing & Walling profile line library - LYSAGHT content
Create 2-D continuous profile lines, created for Revit 2014. note: Some adjustments to the lapping has occurred to turn the profile into a line, if the profile is critical, refer the rollformers documentation. The profile line was created in Revit, no dwg profiles were imported. The profile lines include the flip option.
Dated added/updated: 18/03/14
3,000.35  KB  

Revit
Revit 2013 Roofing & Walling profile line library - LYSAGHT content
Create 2-D continuous profile lines, created for Revit 2013. note: Some adjustments to the lapping has occurred to turn the profile into a line, if the profile is critical, refer the rollformers documentation. The profile line was created in Revit, no dwg profiles were imported. The profile lines include the flip option.
Dated added/updated: 18/03/14
3,022.35  KB  
 


Profiled Texture Downloads Top of Page
File Type Thumbnail Name/Description File Size Download
 

ZIP
SPANDEK® textures (BMP format)
SPANDEK® COLORBOND® steel textures - 29 colours (including COLORBOND® Metallic and COOLMAX® steel colours) and ZINCALUME® steel.
Dated added/updated: 18/10/13
Update summary: Package includes the latest COLORBOND® steel colours; Cove™, Mangrove™, Gully™, Wallaby™, Terrain™, and Basalt™.
382.52  KB  

ZIP
COLORBOND® steel Texture Library for SketchUp - LYSAGHT Content
Package includes the latest COLORBOND® steel colours; Cove™, Mangrove™, Gully™, Wallaby™, Terrain™, and Basalt™. Installation instructions are included with this download. This version is suitable for Mac OS.
Dated added/updated: 05/12/13
4,968.59  KB  
 
Renders - Flat Colour Swatches Top of Page
File Type Thumbnail Name/Description

ZIP
COLORBOND® steel colour swatches
COLORBOND® Ultra steel colour swatches
COLORBOND® Stainless steel colour swatches
COLORBOND® Metallic steel colour swatches
COLORBOND® Coolmax™ steel colour swatches

ZIP
ZINCALUME® steel texture

ZIP
TRUECORE® steel texture